Elizabeth Baeza
Oct 2026
They came and did the garage floor of my house. Super efficient, and price friendly! Definitely recommend if you’re looking for epoxy flooring.
Garage, shop and basement floor coatings for Kuna homes — from the subdivisions off Meridian and Ten Mile Road to the acreage properties toward Melba. Diamond-ground, moisture-barrier basecoat, one-day flake installs.
Kuna, Idaho mixes fast-growing subdivisions with big-lot country properties, and that shows up in the floors we coat here: two- and three-car garages in the newer neighborhoods along Meridian Road, Ten Mile and Deer Flat, plus detached shops, RV garages and basements on the acreage south and west of town. Resin4U installs epoxy and polyaspartic floor coatings across Kuna and down toward Melba and Lake Lowell.
We are a local, owner-run company based in Nampa, about 15 minutes away. The person who measures your slab is the person who installs the floor.
Call or text (208) 808-4168 for a free on-site estimate anywhere in Kuna.
The garage floors that fail in Kuna usually failed on day one: a kit epoxy or a builder sealer over concrete that was never ground, so there was nothing for it to bond to. Hot tires in August and salt in January finish the job. On older country properties we also see oil-soaked slabs and old paint that has to come off completely before anything new will stick.
Our process does not change: diamond grinding with HEPA dust control, crack and joint repair, a moisture-vapor-barrier epoxy basecoat, full flake broadcast to 100% coverage and a UV-stable polyaspartic topcoat. For shops with lifts and welders we build the topcoat heavier where the abuse is.
Every Kuna floor gets the same six steps. No shortcuts, no “roll it on and hope” kits.
We measure, check for moisture and old sealers, and confirm the color and layout with you.
Industrial grinders with HEPA vacuums open the concrete so the coating bonds into the slab, not onto it.
Cracks, spalls and control joints get filled and leveled so they don't telegraph through the finish.
A moisture-vapor-barrier epoxy basecoat stops ground moisture from lifting the floor later.
Flake is thrown to refusal for 100% coverage, then scraped smooth once it sets.
A UV-stable polyaspartic clear coat seals it all. Walk on it at 24 hours, park at 72.
The price of a garage floor coating in Kuna depends on square footage, slab condition (grinding, crack repair, removing an old coating or paint), stem walls and steps, and the finish you pick. Large shops and RV garages are priced per the actual footage, and we are happy to coat only the bays you use.
Every Kuna estimate is free and on-site. We measure, check the slab, bring flake sample boards and give you a firm written number before we book the install.
Resin4U has installed floors in Kuna. Three of them below.
We cover all of Kuna and the surrounding south Ada County area, including:
Resin4U holds a 5.0 rating on Google. A few recent reviews from Treasure Valley customers:
They came and did the garage floor of my house. Super efficient, and price friendly! Definitely recommend if you’re looking for epoxy flooring.
Very conscientious and a pleasure to work with. The job came out beautifully.
They showed up on time, got it done as promised and the final result looks great!
Resin4u Epoxy did an amazing job on my garage! They were priced well, very detail oriented and got the install done quickly.
Yes. Resin4U installs epoxy, full-flake and polyaspartic floor coatings for garages, shops and basements throughout Kuna, Idaho, and out toward Melba. We are based in Nampa and have completed several floors in Kuna.
Yes. We coat shops regularly. The grind, moisture-barrier basecoat and polyaspartic topcoat handle lifts, jack stands, welding slag and dropped tools far better than paint, and we can build the topcoat thicker in work zones.
Yes. A flake coating with a moisture-barrier basecoat is one of the best floors for a Treasure Valley basement: it seals the slab, cleans with a mop, and is not ruined by a water heater leak the way carpet or laminate is.
Most garages are installed in one day. Walk on it at 24 hours, move things back in at 48 and park at 72.
We follow a 24-48-72 rule: walk on it at 24 hours, move your things back in at 48, and park on it at 72. Most two-car garages are installed in a single day.
Yes. Our polyaspartic topcoat cures in cold weather, and we warm the slab when needed. Fall and winter are busy months for us because people want the floor done before the snow and road salt arrive.
Full flake gives the floor a light texture that grips better than bare concrete, and we can add an anti-slip additive to the topcoat for entries, shops and areas that see standing water.
Yes. Every Resin4U floor is backed by a workmanship warranty that covers adhesion, peeling and finish defects from installation. We walk you through the exact coverage for your system before we start.
Also serving nearby Meridian, Nampa, Boise and Caldwell.
Tell us the square footage and what the slab looks like — we’ll get you a firm written price.
Tell us about your space — we'll reply within hours.